Your position: Home >> Car Accessories >> Car Jump Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter
  • Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter

Baseus Car Jump Starter Battery Power Bank Portable 12V 800A Vehicle Emergency Battery Booster for 4.0L Car Power Starter

Rate:
0/5

(2665 reviews)

Item NO.: BS000157 Ships in 1 - 3 days MOQ: 1
Price: $ 97.19 $ 121.49 (20% OFF)
Color:
Ships From:
  • Poland
  • China
  • Russian Federation
  • SPAIN
Qty:
Related Products
  • Description
  • Reviews
  • Product consultation(0)
Do You Have Such Troubles?
1.Left unused for too long
2.Negligence in using battery-consuming appliances
3.Temperature is too Low
Emergency Start-up Safe and Secure
Spare Engine for Your Car
How to use the BASEUS Jump Starter? Using the device as a 12V jump starter:
1.Insert the smart ignition clip into the EC5 interface of the startuppower supply, the red light and green light of the smart clip will flash alternately
2.Clamp the positive and negative anodes of the smart ignition clip on to the car battery respectively. The red clip should be connected to the positive (+) end, while the black clip should be connected to the negative (-) end.Then, follow the instructions below:
When the green light is turned on, the connection is correct and the battery can be jump started.
When the red light is turned on, the clips are connected to the wrong ends. Connect the clips correctly and make sure the green light is turned on before jump starting the battery.
3.Go back to the car and start the car
4.Remove the start-up power immediately after starting the car
(Notes: When the ignition clip is connected to the battery in order, if the indicator light on the side of the ignition clip lights up red, you need to use the forced start switch---------Disconnect the negative pole of the ignition clip and press and hold the forced start switch on the side of the ignition clip for 3-5 seconds When the ignition clip indicator lights green, connect the negative pole to the battery.Then start the car.)
*Note: The product offers the best starting performance when it is fully charged or above Level 2 of battery.It is recommended to check the battery level of the product before using.
Product Information
--Capacity: 8000mAh/3.7V/29.6Wh
--Rated output capacity: 4900mAh
--Input: 5V/2.1A(Max)
--USB output: 5V2.4A(Max)
--Start-up voltage: 12V
--Start-up current: 400A
--Peak current: 800A
--Suitable models : gasoline vehicles with a displacement of less than 4.0 L or diesel vehicles with a displacement of Less than 2.5 L
Suitable for 90% vehicles
12V petrol vehicles with displacement not exceeding 4.0L
12V diesel vehicles with displacement not exceeding 2.5L
Vehicle type:Car/SUV/Business car/Electric car/Motorcycle/Van/Pick up/Small truck
Large Power Capacity Durable Power Supply
Actual measurement shows that the Crown 3.0L naturally aspirated car can be started more than 40 times when fully charged
Easy Startup Even Under Low Temperature
High magnification polymer cell, safe under low temperature still can be successfully started at the temperature of minus 40℃.
Creative Car Modeling
1: 1 Precision Reproduction
Multi-mode Emergency Lighting
Long-press to start the lighting, multiple modes are available which can be switched freely as required.
Upgraded Battery Pack
Stronger Performance
Annular Charging Indicator Light
4-level Annular Charging Indicator Light, Clear Battery Level at a Glance
Supply Power for Electronic Products
One USB output port is designed for the fast power supply of 5V/2.4 A for electronic products such as mobile phones


Recommendations